Interlogix GE-DSSG-244-POE User Manual - Manual (Page 74)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
72
SNMPv3 Users Configuration
Configure SNMPv3 users table on this page. The entry index key are Engine ID and User Name. The SNMPv3 Users Configuration
screen is shown
Figure 4-3-5 .
Figure 4-3-5 SNMPv3 Users Configuration page screenshot
The page includes the following fields:
Object Description
•
Delete
Check to delete the entry. It will be deleted during the next save.
•
Engine ID
An octet string identifying the engine ID that this entry should belong to. The
string must contain an even number between 10 and 64 hexadecimal digits, but
all-zeros and all-'F's are not allowed.
•
User Name
A string identifying the user name that this entry should belong to. The allowed
string length is 1 to 32, and the allowed content is the ASCII characters from 33
to 126.
•
Security Level Indicates the security model that this entry should belong to. Possible security
models are:
NoAuth, NoPriv
: None authentication and none privacy.
Auth, NoPriv : Authentication and none privacy.
Auth, Priv : Authentication and privacy.
The value of security level cannot be modified if entry already exist. That means
must first ensure that the value is set correctly.
•
Authentication
Protocol
Indicates the authentication protocol that this entry should belong to. Possible
authentication protocol are:
None
: None authentication protocol.
MD5 : An optional flag to indicate that this user using MD5 authentication
protocol.
SHA
: An optional flag to indicate that this user using SHA authentication protocol.
The value of security level cannot be modified if entry already exist. That means
must first ensure that the value is set correctly.
• Authentication
Password
A string identifying the authentication pass phrase. For MD5 authentication
protocol, the allowed string length is 8 to 32. For SHA authentication protocol, the
allowed string length is 8 to 40. The allowed content is the ASCII characters from
33 to 126.
• Privacy Protocol Indicates the privacy protocol that this entry should belong to. Possible privacy
protocol are:
None
: None privacy protocol.
DES : An optional flag to indicate that this user using DES authentication protocol.
• Privacy Password A string identifying the privacy pass phrase. The allowed string length is 8 to 32,
and the allowed content is the ASCII characters from 33 to 126.
Buttons
: Click to add a new user entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.