Interlogix GE-DSSG-244-POE User Manual - Manual (Page 304)

User’s Manual of NS3601-24P/4S Series
302
Security Switch SNMP Trap Mode
Description:
Set or show the SNMP trap mode.
Syntax:
Security Switch SNMP Trap Mode [enable|disable]
Parameters:
enable : Enable SNMP traps
disable : Disable SNMP traps
(default: Show SNMP trap mode)
Default Setting:
disable
Example:
Enable SNMP trap mode.
SWITCH/>security switch snmp trap mode enable
Security Switch SNMP Trap Version
Description:
Set or show the SNMP trap protocol version.
Syntax:
Security Switch SNMP Trap Version [1|2c|3]
Parameters:
1 : SNMP version 1
2c : SNMP version 2c
3 : SNMP version 3
(default: Show SNMP trap version)
Default Setting:
1
Example:
Set SNMP trap version in version 2c.
SWITCH/>security switch snmp trap version 2c
Security Switch SNMP Trap Community
Description:
Set or show the community string for SNMP traps.
Syntax:
Security Switch SNMP Trap Community []
Parameters:
: Community string. Use 'clear' or "" to clear the string
(default: Show SNMP trap community)
Default Setting:
public
Example:
Set private value for SNMP trap community.
SWITCH/>security switch snmp trap community private