Interlogix GE-DSSG-244-POE User Manual - Manual (Page 227)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
225
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Dynamic ARP Inspection Table
Entries in the Dynamic ARP Inspection Table are shown on this page. The Dynamic ARP Inspection Table contains up to 1024
entries, and is sorted first by port, then by VLAN ID, then by MAC address, and then by IP address. The Dynamic ARP Inspection
Table screen is shown
Figure 4-13-5 .
Figure 4-13-5 Dynamic ARP Inspection Table screenshot
Navigating the ARP Inspection Table
Each page shows up to 999 entries from the Dynamic ARP Inspection table, default being 20, selected through the "entries per
page
" input field. When first visited, the web page will show the first 20 entries from the beginning of the Dynamic ARP Inspection
Table.
The "Start from port address", "VLAN", "MAC address" and "IP address" input fields allow the user to select the starting point in
the Dynamic ARP Inspection Table. Clicking the “Refresh” button will update the displayed table starting from that or the closest
next Dynamic ARP Inspection Table match. In addition, the two input fields will - upon a “Refresh” button click - assume the value of
the first displayed entry, allowing for continuous refresh with the same start address.
The “
>> ” will use the last entry of the currently displayed as a basis for the next lookup. When the end is reached the text "No more
entries" is shown in the displayed table. Use the “ |<< ” button to start over.
The page includes the following fields:
Object Description
•
Port
The port number for which the status applies. Click the port number to see the
status for this particular port.
•
VLAN ID
The VLAN ID of the entry.
•
MAC address
The MAC address of the entry.
•
IP Address The IP address of the entry.
Buttons
Auto-refresh
: Check this box to enable an automatic refresh of the page at regular intervals.
: Refreshes the displayed table starting from the "Start from MAC address" and "VLAN" input fields.
: Flushes all dynamic entries.
: Updates the table starting from the first entry in the MAC Table, i.e. the entry with the lowest VLAN ID and MAC address.
: Updates the table, starting with the entry after the last entry currently displayed.