Poe power supply, Poe status, Quality of service command – Interlogix GE-DSSG-244-POE User Manual User Manual
Page 365: Qos configuration
User’s Manual of NS3601-24P/4S Series
363
SWITCH/>poe alloc_power 1-4 10
PoE Power Supply
Description:
Set or show the value of the power supply.
Syntax:
PoE Power_Supply [
Parameters:
: PoE power for a power supply
Example:
Set 200 watts of power supply.
SWITCH/>poe power_supply 200
PoE Status
Description:
Show PoE status.
Syntax:
PoE Status
Quality of Service Command
QoS Configuration
Description:
Show QoS Configuration.
Syntax:
QoS Configuration [
Parameters:
: Port list or 'all', default: All ports
Example:
Show QoS Configuration of port 1-4.
SWITCH/>qos configuration 1-4
QoS Configuration:
==================
Traffic Classes: 4
Storm Multicast: Disabled 1 pps
Storm Broadcast: Disabled 1 pps
Storm Unicast : Disabled 1 pps
Port Default Tag Priority QCL ID Rate Limiter Shaper Mode Weight
---- ------- ------------ ------ ------------ --------- -------- ------
1 Low 0 1 Disabled Disabled Strict 1/2/4/8
2 Low 0 1 Disabled Disabled Strict 1/2/4/8
3 Low 0 1 Disabled Disabled Strict 1/2/4/8
4 Low 0 1 Disabled Disabled Strict 1/2/4/8