Interlogix GE-DSSG-244-POE User Manual - Manual (Page 24)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
22
■ 10/100/1000Base-T interfaces (Shared Port-1~Port-8)
LED Color Function
illuminates:
To indicate the link through that port is successfully established with speed
1000Mbps
Blink : To indicate that the switch is actively sending or receiving data over that
port. 1000
LNK/ACT
Green
Off: If L10/100 NK/ACT LED light-> indicate that the port is operating at 10Mbps
or 100Mbps
If LNK/ACT LED Off -> indicates that the port is link down
Illuminates:
To indicate the link through that port is successfully established with speed
10Mbps or 100Mbps
Blink : To indicate that the switch is actively sending or receiving data over that
port.
10/100
LNK/ACT
Orange
Off: If 1000 LNK/ACT LED light-> indicates that the port is operating at
1000Mbps
If 1000 LNK/ACT LED Off -> indicates that the port is link down
■ 100 / 1000Base-X SFP interfaces
LED Color Function
Illuminates:
To indicate the link through that SFP port is successfully established with
speed 1000Mbps
1000
LNK
Green
Off: To indicate that the SFP port is link down
Illuminates:
To indicate the link through that port is successfully established with speed
100Mbps
Blink : To indicate that the switch is actively sending or receiving data over that
port.
100
LNK/ACT
Orange
Off: If 1000 LNK/ACT LED light-> indicate that the port is operating at
1000Mbps
If 1000 LNK/ACT LED Off -> indicate that the port is link down
■ 7-Segment LED Display
Stack ID (1~9, A~F, 0): To indicate the Switch ID of each IFS Managed Switch. Switch IDs are used to uniquely identify the
Managed Switches within a stack. The Switch ID of each Managed Switch is shown on the display on the front of the Managed
Switch and is used widely in the web pages as well as in the CLI commands of the Stack group.
Stack ID 1 2 3 4 5 6 7 8 9 A. B. C. D. E. F. 0
Switch ID 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Switch Rear Panel
The rear panel of the Managed Switch indicates an AC inlet power socket, which works with the input power range from 100 to 240V
AC, 50-60Hz.
Figure 2-5 & Figure 2-6 shows the rear panel of these Managed Switches.
GE-DSSG-244 Rear Panel
Figure 2-5 Rear panel of GE-DSSG-244