Interlogix GE-DSSG-244-POE User Manual - Manual (Page 374)

User’s Manual of NS3601-24P/4S Series
372
enable : Enable UPnP
disable : Disable UPnP
(default: Show UPnP mode)
Default Setting:
disable
Example:
Enable the UPnP mode.
SWITCH/>upnp mode enable
UPnP TTL
Description:
Set or show the TTL value of the IP header in SSDP messages.
Syntax:
UPnP TTL []
Parameters:
: ttl range (1..255), default: Show UPnP TTL
Default Setting:
4
Example:
Set the value 10 for TTL value of the IP header in SSDP messages.
SWITCH/>upnp ttl 10
UPnP Advertising Duration
Description:
Set or show UPnP Advertising Duration.
Syntax:
UPnP Advertising Duration []
Parameters:
: duration range (100..86400), default: Show UPnP duration range
Default Setting:
100
Example:
Set value 1000 for UPnP Advertising Duration.
SWITCH/>upnp advertising duration 1000
MVR Command
MVR Configuration
Description:
Show the MVR configuration.
Syntax:
MVR Configuration