Interlogix GE-DSSG-244-POE User Manual - Manual (Page 305)

User’s Manual of NS3601-24P/4S Series
303
Security Switch SNMP Trap Destination
Description:
Set or Show the SNMP trap destination address.
Syntax:
Security Switch SNMP Trap Destination []
Parameters:
: IP host address (a.b.c.d) or a host name string
Example:
Set SNMP trap destination address for 192.168.0.20
SWITCH/>security switch snmp trap destination 192.168.0.20
Security Switch SNMP Trap IPv6 Destination
Description:
Set or Show the SNMP trap destination IPv6 address.
Syntax:
Security Switch SNMP Trap IPv6 Destination []
Parameters:
: IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a colon
separates each field (:). For example, four hexadecimal digits with a colon separates each field (:). For
example, fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand way
of representing multiple 16-bit groups of contiguous zeros; but it can only appear once. It also used a
following legally IPv4 address. For example,'::192.1.2.34'.
Example:
Set SNMP trap IPv6 destination address for 2001::0001
SWITCH/>security switch snmp trap ipv6 destination 2001::0001
Security Switch SNMP Trap Authentication Failure
Description:
Set or show the SNMP authentication failure trap mode.
Syntax:
Security Switch SNMP Trap Authentication Failure [enable|disable]
Parameters:
enable : Enable SNMP trap authentication failure
disable : Disable SNMP trap authentication failure
(default: Show SNMP trap authentication failure mode)
Default Setting:
enable
Example:
Disable SNMP trap authentication failure
SWITCH/>security switch snmp trap authentication failure disable
Security Switch SNMP Trap Link-up
Description:
Set or show the port link-up and link-down trap mode.