Interlogix GE-DSSG-244-POE User Manual - Manual (Page 355)

User’s Manual of NS3601-24P/4S Series
353
SWITCH/>lacp statistics 1-4
Port Rx Frames Tx Frames Rx Unknown Rx Illegal
------ --------------- --------------- --------------- ----------
1 0 0 0 0
2 0 0 0 0
3 0 0 0 0
4 0 0 0 0
LLDP Command
LLDP Configuration
Description:
Show LLDP configuration.
Syntax:
LLDP Configuration []
Parameters:
: Port list or 'all', default: All ports
Example:
Show LLDP configuration of port1~4
SWITCH/>lldp configuration 1-4
LLDP Configuration:
===================
Interval : 30
Hold : 3
Tx Delay : 2
Reinit Delay: 2
Port Mode Port Descr System Name System Descr System Capa Mgmt Addr CDP awareness
---- -------- ---------- ----------- ------------ ----------- --------- -------------
1 Enabled Enabled Enabled Enabled Enabled Enabled Disabled
2 Enabled Enabled Enabled Enabled Enabled Enabled Disabled
3 Enabled Enabled Enabled Enabled Enabled Enabled Disabled
4 Enabled Enabled Enabled Enabled Enabled Enabled Disabled
LLDP Mode
Description:
Set or show LLDP mode.
Syntax:
LLDP Mode [] [enable|disable|rx|tx]
Parameters:
: Port list or 'all', default: All ports
enable : Enable LLDP reception and transmission
disable : Disable LLDP
rx : Enable LLDP reception only
tx : Enable LLDP transmission only
(default: Show LLDP mode)
Default Setting:
disable
Example:
Enable port1 LLDP function.