Security switch ssh configuration, Security switch ssh mode, Security switch https configuration – Interlogix GE-DSSG-244-POE User Manual User Manual
Page 297
User’s Manual of NS3601-24P/4S Series
295
Default Setting:
Authentication Method: local
Fallback: disable
Example:
Use RADIUS authentication method for telnet.
SWITCH/>security switch auth method telnet radius enable
Security Switch SSH Configuration
Description:
Show SSH configuration.
Syntax:
Security Switch SSH Configuration
Example:
Show SSH configuration.
SWITCH/>security switch ssh configuration
SSH Configuration:
==================
SSH Mode : Disabled
Security Switch SSH Mode
Description:
Set or show the SSH mode.
Syntax:
Security Switch SSH Mode [enable|disable]
Parameters:
enable
: Enable SSH
disable
: Disable SSH
(default: Show SSH mode)
Default Setting:
disable
Example:
Enable SSH function.
SWITCH/>security switch ssh mode enable
Security Switch HTTPs Configuration
Description:
Show HTTPS configuration.
Syntax:
Security Switch HTTPS Configuration
Default Setting:
disable
Example:
Show HTTPs configuration.