Interlogix GE-DSSG-244-POE User Manual - Manual (Page 322)

User’s Manual of NS3601-24P/4S Series
320
enable :The Guest VLAN can be entered even if an EAPOL frame has been received during the lifetime of the port
(default: Show current setting)
Default Setting:
disable
Example:
Enable NAS guest VLAN
SWITCH/>security network nas guest_vlan enable
Security Network NAS Authenticate
Description:
Refresh (restart) 802.1X authentication process.
Syntax:
Security Network NAS Authenticate [] [now]
Parameters:
: Port list or 'all', default: All ports
now : Force reauthentication immediately
Example:
Start NAS authentication now for port 1.
SWITCH/>security network nas authenticate 1 now
Security Network NAS Statistics
Description:
Show or clear 802.1X statistics.
Syntax:
Security Network NAS Statistics [] [clear|eapol|radius]
Parameters:
: Port list or 'all', default: All ports
clear : Clear statistics
eapol : Show EAPOL statistics
radius : Show Backend Server statistics
(default: Show all statistics)
Example:
Show 802.1X statistics in port 1
SWITCH/>security network nas statistics 1
Port 1 EAPOL Statistics:
Rx Total: 0 Tx Total: 0
Rx Response/Id: 0 Tx Request/Id: 0
Rx Response: 0 Tx Request: 0
Rx Start: 0
Rx Logoff: 0
Rx Invalid Type: 0
Rx Invalid Length: 0
Port 1 Backend Server Statistics:
Rx Access Challenges: 0 Tx Responses: 0
Rx Other Requests: 0
Rx Auth. Successes: 0
Rx Auth. Failures: 0