Interlogix GE-DSSG-244-POE User Manual - Manual (Page 64)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
62
TFTP Firmware Upgrade
The Firmware Upgrade page provides the functions to allow a user to update the Managed Switch firmware from the TFTP server
in the network. Before updating, make sure you have your TFTP server ready and the firmware image is on the TFTP server. The
TFTP Firmware Upgrade screen is shown
Figure 4-2-20 .
Figure 4-2-20 TFTP Firmware Update page screenshot
The page includes the following fields:
Object Description
• TFTP Server IP Fill in your TFTP server IP address.
• Firmware File Name The name of firmware image.
(Maximum length : 24 characters)
Buttons : Click to upgrade firmware.
DO NOT Power OFF the Managed Switch until the update progress is complete.
Do not quit the Firmware Upgrade page without press the “OK” button - after the image be
loaded. Or the system won’t apply the new firmware. User has to repeat the firmware
upgrade processes again.
Configuration Backup
This function allows backup and reload the current configuration of the Managed Switch to the local management station. The
Configuration Backup screen is shown
Figure 4-2-21.
Figure 4-2-21 Configuration Backup page screenshot
You can save/view or load the switch configuration. The configuration file is in XML format with a hierarchy of tags:
Header tags: and . These tags are mandatory and must be
present at the beginning of the file.
Section tags: , and . The platform section must be the first section tag