Interlogix GE-DSSG-244-POE User Manual - Manual (Page 135)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
133
IGMP Snooping Configuration
This page provides IGMP Snooping related configuration.
Most of the settings are global, whereas the Router Port configuration is related to the currently selected stack unit, as reflected by
the page header. The IGMP Snooping Configuration screen is shown
Figure 4-8-5 .
Figure 4-8-5 IGMP Snooping Configuration page screenshot
The page includes the following fields:
Object Description
•
Snooping Enabled Enable the Global IGMP Snooping.
•
Unregistered IPMC
Flooding enabled Enable unregistered IPMC traffic flooding.
• Leave Proxy Enable Enable the leave proxy.
•
VLAN ID The VLAN ID of the entry.
•
Snooping Enabled
Enable the per-VLAN IGMP Snooping.
•
IGMP Querier
Enable the IGMP Querier in the VLAN. The Querier will send out if no Querier
received in 255 seconds after IGMP Querier Enabled. Each Querier's interval is
125 second, and it will stop act as an IGMP Querier if received any Querier from
other devices.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
IGMP Port Related Configuration
This page provides IGMP Snooping related configuration.
Most of the settings are global, whereas the Router Port configuration is related to the currently selected stack unit, as reflected by
the page header. The IGMP Port Related Configuration screen is shown
Figure 4-8-6 .