Interlogix GE-DSSG-244-POE User Manual - Manual (Page 231)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
229
CDP TLV "Port ID" is mapped into the LLDP "Port ID" field.
CDP TLV "Version and Platform" is mapped into the LLDP "System Description"
field.
Both the CDP and LLDP supports "system capabilities", but the CDP capabilities
cover capabilities that are not part of the LLDP. These capabilities are shown as
"others" in the LLDP neighbors table.
If all ports have CDP awareness disabled the switch forwards CDP frames
received from neighbor devices. If at least one port has CDP awareness enabled
all CDP frames are terminated by the switch.
Note: When CDP awareness for a port is disabled the CDP information isn't
removed immediately, but will be removed when the hold time is exceeded.
•
Port Descr Optional TLV: When checked the "port description" is included in LLDP
information transmitted.
•
Sys Name
Optional TLV: When checked the "system name" is included in LLDP information
transmitted.
•
Sys Descr
Optional TLV: When checked the "system description" is included in LLDP
information transmitted.
• Sys Capa Optional TLV: When checked the "system capability" is included in LLDP
information transmitted.
The system capabilities identifies the primary function(s) of the system and
whether or not these primary functions are enabled. The information advertised
by this TLV is described in IEEE 802.1AB.
• Mgmt Addr Optional TLV: When checked the "management address" is included in LLDP
information transmitted.
The management address protocol packet includes the IPv4 address of the
switch. If no management address is available, the address should be the MAC
address for the CPU or for the port sending this advertisement. The management
address TLV may also include information about the specific interface associated
with this address, and an object identifier indicating the type of hardware
component or protocol entity associated with this address
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
LLDPMED Configuration
This page allows you to configure the LLDP-MED. The LLDPMED Configuration screen is shown Figure 4-14-2 .