Interlogix GE-DSSG-244-POE User Manual - Manual (Page 282)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
280
actiphy : Enable ActiPHY power control
dynamic : Enable Dynamic power control
Default Setting:
Enable
Example:
Disable port power function for port1-4
SWITCH/>port power 1-4 disable
Port SFP
Description:
Show SFP port information.
Syntax:
Port SFP []
Parameters:
: Port list or 'all', default: All ports
Example:
Show SFP information for port21-24
SWITCH/>port sfp
Port Type Speed Wave Length(nm) Distance(m)
---- -------------- -------- --------------- -----------
21 1000Base-LX 1000-Base 1310 10000
22 1000Base-LX 1000-Base 1310 10000
23 -- -- -- --
24 -- -- -- --
Port Excessive
Description:
Set or show the port excessive collision mode.
Syntax:
Port Excessive [] [discard|restart]
Parameters:
: Port list or 'all', default: All ports
discard : Discard frame after 16 collisions
restart : Restart backoff algorithm after 16 collisions
(default: Show mode)
Default Setting:
Discard
Example:
SWITCH/>port excessive 1 restart
Port Statistics
Description:
Show port statistics.
Syntax:
Port Statistics [] [] [up|down]