Interlogix GE-DSSG-244-POE User Manual - Manual (Page 343)

User’s Manual of NS3601-24P/4S Series
341
STP Port Mode
Description:
Set or show the STP enabling for a port.
Syntax:
STP Port Mode [] [enable|disable]
Parameters:
: Port list or 'all'. Port zero means aggregations.
Enable : Enable MSTP protocol
Disable : Disable MSTP protocol
Default:
Enable
Example:
Disable STP function on port1
SWITCH/>stp port mode 1 disable
STP Port Edge
Description:
Set or show the STP adminEdge port parameter.
Syntax:
STP Port Edge [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
Enable : Configure MSTP adminEdge to Edge
Disable : Configure MSTP adminEdge to Non-edge
Default:
Enable
Example:
Disable STP edge function on port1
SWITCH/>stp port edge 1 disable
STP Port AutoEdge
Description:
Set or show the STP autoEdge port parameter.
Syntax:
STP Port AutoEdge [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
Enable : Enable MSTP autoEdge
Disable : Disable MSTP autoEdge
Default:
enable
Example:
Disable STP edge function on port1