Interlogix GE-DSSG-244-POE User Manual - Manual (Page 352)

User’s Manual of NS3601-24P/4S Series
350
Aggr Lookup []
Parameters:
: Aggregation ID , global: 1-2, local: 3-14
Example:
Show aggregation status
SWITCH/>aggr lookup 1
Aggr ID Name Type Ports
----------- ------- ------- -------
1 GLAG1 Static 1-4
Aggregation Mode
Description:
Set or show the link aggregation traffic distribution mode.
Syntax:
Aggr Mode [smac|dmac|ip|port] [enable|disable]
Parameters:
smac
: Source MAC address
dmac : Destination MAC address
ip : Source and destination IP address
port : Source and destination UDP/TCP port
enable : Enable field in traffic distribution
disable : Disable field in traffic distribution
Default Setting:
SMAC : Enabled
DMAC : Disabled
IP : Enabled
Port : Enabled
Example:
Disable SMAC mode
SWITCH/>Aggr mode smac disable
Link Aggregation Control Protocol Command
LACP Configuration
Description:
Show LACP configuration.
Syntax:
LACP Configuration []
Parameters:
: Port list or 'all', default: All ports
Example:
Show LACP configuration
SWITCH/>lacp configuration
Port Mode Key Role
---- -------- ---- ------