Interlogix GE-DSSG-244-POE User Manual - Manual (Page 63)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
61
Buttons
: Send a test mail to mail server to check this account is available or not.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Web Firmware Upgrade
This page facilitates an update of the firmware controlling the switch. The Web Firmware Upgrade screen is shown Figure 4-2-18 .
Figure 4-2-18 Web Firmware Upgrade page screenshot
To open Firmware Upgrade screen perform the folling:
1. Click System -> Web Firmware Upgrade.
2. The Firmware Upgrade screen is displayed as in Figure 4-2-18 .
3. Click the “ “button of the main page, the system would pop up the file selection menu to choose firmware.
4. Select the firmware file and then click “ ”, the Software Upload Progress would show the file upload status.
5. Once the software is loaded to the system successfully, the following screen. The system will load the new software after
reboot.
Figure 4-2-19 Software successfully loaded notice screen
DO NOT Power OFF the Managed Switch until the update progress is complete.
Do not quit the Firmware Upgrade page without pressing the “OK” button - after the image
be loaded. Or the system won’t apply the new firmware. User has to repeat the firmware
upgrade processes again.