Led indications, Packet contents, Snmpv3 configuration – Interlogix GE-DSSG-244-POE User Manual User Manual
Page 22: Qos statistics, Ipv6 ping, What is poe
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
20
LED Indications
The front panel LEDs indicates instant status of port links, data activity and system power; helps monitor and troubleshoot when
needed.
Figure 2-3 & Figure 2-4
shows the LED indications of these Managed Switches.
NS3601-24P/4S /GE-DSSG-244-POE LED indication
Figure 2-3
GE-DSSG-244-POE / NS3601-24P/4S LED panel
System
LED
Color
Function
PWR
Green
Illuminates
to indicate that the Switch has power.
SYS
Green
Illuminates
to indicate the system is on.
Alert
LED
Color
Function
PWR Alert
Green
Illuminates
to indicate that the PoE power supply has failed.
FAN1
Green
Illuminates
to indicate that the FAN1 has failed.
FAN2
Green
Illuminates
to indicate that the FAN2 has failed.
FAN3
Green
Illuminates
to indicate that the FAN3 has failed.
Per 10/100Mbps port, PoE interfaces (Port-1 to Por-24)
LED
Color
Function
Illuminates
: To indicate the link through that port is successfully established.
LNK/ACT
Green
Blink:
To indicate that the Switch is actively sending or receiving data over that port.
Illuminates
: To indicate the port is providing 52V DC in-line power.
PoE In-Use
Orange
Off:
To indicate the connected device is not a PoE Powered Device (PD).