Interlogix GE-DSSG-244-POE User Manual - Manual (Page 62)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
60
SMTP Configure
This page facilitates a SMTP Configure the switch. The SMTP Configure screen is shown Figure 4-2-17 .
Figure 4-2-17 SMTP Configuration page screenshot
The page includes the following fields:
Object Description
• SMTP Mode Controls whether SMTP is enabled on this switch.
• SMTP Server Type the SMTP server name or the IP address of the SMTP server.
• SMTP Port Set port number of SMTP service.
• SMTP Authentication Controls whether SMTP authentication is enabled If authentication is required
when an e-mail is sent.
• Authentication User
Name
Type the user name for the SMTP server if Authentication is Enable.
• Authentication
Password
Type the password for the SMTP server if Authentication is Enable.
• E-mail From Type the sender’s E-mail address. This address is used for reply e-mails.
• E-mail Subject Type the subject/title of the e-mail.
• E-mail 1 To
• E-mail 2 To
Type the receiver’s e-mail address.