Interlogix GE-DSSG-244-POE User Manual - Manual (Page 211)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
209
• SNMP Indicates the host can access the switch from SNMP interface that the host IP
address matched the entry.
• TELNET/SSH Indicates the host can access the switch from TELNET/SSH interface that the
host IP address matched the entry.
Buttons
: Click to add a new access management entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Access Management Statistics
This page provides statistics for access management. The Access Management Statistics screen is shown Figure 4-12-3 .
Figure 4-12-3 Access Management Statistics Overview page screenshot
The page includes the following fields:
Object Description
• Interface The interface that allowed remote host can access the switch.
• Receive Packets The received packets number from the interface under access management
mode is enabled.
• Allow Packets The allowed packets number from the interface under access management
mode is enabled.
• Discard Packets The discarded packets number from the interface under access management
mode is enabled.
Buttons
Auto-refresh
: Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
: Clear all statistics.