Interlogix GE-DSSG-244-POE User Manual - Manual (Page 307)

User’s Manual of NS3601-24P/4S Series
305
Syntax:
Security Switch SNMP Trap Inform Retry Times []
Parameters:
: SNMP trap inform retransmited times (0-255)
(default: Show SNMP trap inform retry times)
Default Setting:
5
Example:
Set SNMP trap inform retry times in 10.
SWITCH/>security switch snmp trap inform retry times 10
Security Switch SNMP Trap Probe Security Engine ID
Description:
Show SNMP trap security engine ID probe mode.
Syntax:
Security Switch SNMP Trap Probe Security Engine ID [enable|disable]
Parameters:
enable : Enable SNMP trap security engine ID probe
disable : Disable SNMP trap security engine ID probe
(default: Show SNMP trap security engine ID probe mode)
Default Setting:
enable
Example:
Disable SNMP trap probe security engine ID
SWITCH/>security switch snmp trap probe security engine id disable
Security Switch SNMP Trap Security Engine ID
Description:
Set or show SNMP trap security engine ID.
Syntax:
Security Switch SNMP Trap Security Engine ID []
Parameters:
: Engine ID, the format may not be all zeros or all 'ff'H and is restricted to 5 - 32 octet string
Example:
Set the SNMP trap security engine ID
SWITCH/>security switch snmp trap security engine id 800007e5017f000011
Security Switch SNMP Trap Security Name
Description:
Set or show SNMP trap security name.
Syntax:
Security Switch SNMP Trap Security Name []
Parameters:
: A string representing the security name for a principal