Interlogix GE-DSSG-244-POE User Manual - Manual (Page 260)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
258
•
Last Topology Change
The time of the last topology change in the stack.
•
Master Switch
The MAC address of the current stack master switch.
•
Last Master Change
The time of the last master change in the stack.
„ Stack List
For each switch in the stack, the following information is shown: The MAC address, Switch ID, product name and version, and
master election state. The master election state is normally "No". Only when a forced master election is enforced by the user, the
master election state takes the value "Yes". For details about the master election algorithm, see Stack Configuration. The Stack List
screen is shown
Figure 4-17-8 .
Figure 4-17-8 Stack Information page screenshot - Stack List
„ Master Forwarding Table
As the heading suggests, the information in the table is as seen from the master view.
For each switch in the stack, the following information is shown:
• The MAC address, switch ID, distance information, and the primary forwarding path to the switch.
• For ring topology, a backup path is also provided.
•
Figure 4-17-9 Stack Information page screenshot - Master Forwarding Table
Stack Port State Overview
This page provides an overview of the current switch port states. Clicking on the image of a port opens the Port Statistics page.The
port states are illustrated as follows: