Interlogix GE-DSSG-244-POE User Manual - Manual (Page 321)

User’s Manual of NS3601-24P/4S Series
319
: Select the per-port RADIUS-assigned QoS setting
(default: Show current per-port RADIUS-assigned QoS enabledness)
enable
: Enable RADIUS-assigned QoS either globally or on one or more ports
disable : Disable RADIUS-assigned QoS either globally or on one or more ports
(default: Show current RADIUS-assigned QoS enabledness)
Default Setting:
disable
Example:
Enable NAS RADIUS QoS
SWITCH/>security network nas radius_qos enable
Security Network NAS RADIUS_VLAN
Description:
Set or show either global enabledness (use the global keyword) or per-port enabledness of RADIUS-assigned VLAN.
Syntax:
Security Network NAS RADIUS_VLAN [global|] [enable|disable]
Parameters:
global : Select the global RADIUS-assigned VLAN setting
: Select the per-port RADIUS-assigned VLAN setting
(default: Show current per-port RADIUS-assigned VLAN enabledness)
enable
: Enable RADIUS-assigned VLAN either globally or on one or more ports
disable : Disable RADIUS-assigned VLAN either globally or on one or more ports
(default: Show current RADIUS-assigned VLAN enabledness)
Default Setting:
disable
Example:
Enable NAS RADIUS VLAN
SWITCH/>security network nas radius_vlan enable
Security Network NAS Guest_VLAN
Description:
Set or show either global enabledness and parameters (use the global keyword) or per-port enabledness of Guest VLAN
Unless the 'global' keyword is used, the and parameters will not be unused.
Syntax:
Security Network NAS Guest_VLAN [global|] [enable|disable] [] [] []
Parameters:
global : Select the global Guest VLAN setting
: Select the per-port Guest VLAN setting
(default: Show current per-port Guest VLAN enabledness)
enable|disable
: enable : Enable Guest VLAN either globally or on one or more ports
disable : Disable Guest VLAN either globally or on one or more ports
(default: Show current Guest VLAN enabledness)
: Guest VLAN ID used when entering the Guest VLAN. Use the 'global' keyword to change it
(default: Show current Guest VLAN ID)
: The value can only be set if you use the 'global' keyword in the beginning of the command. The number
of times a Request Identity EAPOL frame is sent without reasponse before considering entering the
Guest VLAN
(default: Show current Maximum Reauth Count value)
: The value can only be set if you use the 'global' keyword in the beginning of the command.
disable :The Guest VLAN can only be entered if no EAPOL frames have been received on a port for the lifetime of the
port