Interlogix GE-DSSG-244-POE User Manual - Manual (Page 189)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
187
These backend (RADIUS) frame counters are available for the following administrative
states:
Port-based 802.1X
Single 802.1X
Multi 802.1X
MAC-based Auth
.
Direction Name IEEE Name Description
Rx Access
Challenges dot1xAuthBackendAcce
ssChallenges 802.1X-based :
Counts the number of times
that the switch receives the
first request from the backend
server following the first
response from the supplicant.
Indicates that the backend
server has communication
with the switch.
MAC-based
:
Counts all Access Challenges
received from the backend
server for this port (left-most
table) or client (right-most
table).
Rx Other
Requests dot1xAuthBackendOther
RequestsToSupplicant 802.1X-based :
Counts the number of times
that the switch sends an EAP
Request packet following the
first to the supplicant.
Indicates that the backend
server chose an EAP-method.
MAC-based
:
Not applicable.
Rx Auth.
Successes dot1xAuthBackendAuth
Successes 802.1X- and MAC-based :
Counts the number of times
that the switch receives a
success indication. Indicates
that the supplicant/client has
successfully authenticated to
the backend server.
Rx Auth.
Failures dot1xAuthBackendAuth
Fails 802.1X- and MAC-based :
Counts the number of times
that the switch receives a
failure message. This
indicates that the
supplicant/client has not
authenticated to the backend
server.
• Backend Server
Counters
Tx Responses dot1xAuthBackendResp
onses 802.1X-based:
Counts the number of times
that the switch attempts to
send a supplicant's first
response packet to the
backend server. Indicates the
switch attempted
communication with the
backend server. Possible
retransmissions are not
counted.
MAC-based:
Counts all the backend server
packets sent from the switch
towards the backend server