Stp status, Stp msti priority – Interlogix GE-DSSG-244-POE User Manual User Manual
Page 341
User’s Manual of NS3601-24P/4S Series
339
: Time before error-disabled ports are reenabled (30-86400 seconds, 0 disables)
(default: Show recovery timeout)
Default Setting:
Disable
Example:
Set STP recovery value in 30 sec.
SWITCH/>stp recovery 30
STP Status
Description:
Show STP Bridge status.
Syntax:
STP Status [
Parameters:
: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
: Port list or 'all', default: All ports
Default Setting:
Disable
Example:
Show STP Bridge status.
SWITCH/>stp status
CIST Bridge STP Status
Bridge ID : 80:00-00:30:4F:24:04:D1
Root ID : 80:00-00:30:4F:24:04:D1
Root Port : -
Root PathCost: 0
Regional Root: 80:00-00:30:4F:24:04:D1
Int. PathCost: 0
Max Hops : 20
TC Flag : Steady
TC Count : 0
TC Last : -
Port Port Role State Pri PathCost Edge P2P Uptime
--------- -------------- ---------- --- -------- ---- --- -------------
14 DesignatedPort Forwarding 128 20000 Yes Yes 0d 00:10:32
STP MSTI Priority
Description:
Set or show the CIST/MSTI bridge priority.
Syntax:
STP Msti Priority [
Parameters:
: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
: STP bridge priority (0/16/32/48/.../224/240)
Default:
MSTI Bridge Priority
---- ---------------
CIST 128
MST1 128
MST2 128
MST3 128