Interlogix GE-DSSG-244-POE User Manual - Manual (Page 248)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
246
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
For IFS GE-DSSG-244-Poe, the total PoE power reservation from Port-1~24 is up to 220W
For NS3601-24P/4S, the total PoE power reservation from Port-1~24 is up to 380W
PD Classifications
A PD may be classified by the PSE based on the classification information provided by the PD. The intent of PD classification is to
provide information about the maximum power required by the PD during operation. Class 0 is the default for PDs. However, to
improve power management at the PSE, the PD may opt to provide a signature for Class 1 to 4.
The PD is classified based on power. The classification of the PD is the maximum power that the PD will draw across all input
voltages and operational modes.
A PD shall return Class 0 to 4 in accordance with the maximum power draw as specified by Table 4-16-1.
Class Usage Range of maximum power used by the PD Class Dsecription
0 Default 0.44 to 12.95 Watts Classification unimplement
1 Optional 0.44 to 3.84 Watts Very low power
2 Optional 3.84 to 6.49 Watts Low power
3 Optional 6.49 to 12.95 Watts (or to 15.4Watts) Mid power
4 Optional 12.95 to 25.50 Watts (or to 30.8Watts) High power
Table 4-16-1 Device class