Interlogix GE-DSSG-244-POE User Manual - Manual (Page 370)

User’s Manual of NS3601-24P/4S Series
368
Default Setting:
Disabled, 1pps
Example:
Enable multicast storm rate limiter in 1kpps
SWITCH/>qos storm multicast enable 1k
QoS Strom Broadcast
Description:
Set or show the multicast storm rate limiter.
Syntax:
QoS Storm Broadcast [enable|disable] []
Parameters:
enable : Enable broadcast storm control
disable : Disable broadcast storm control
: Rate in pps (1, 2, 4, ..., 512, 1k, 2k, 4k, ..., 1024k)
Default Setting:
Disabled, 1pps
Example:
Enable broadcast storm rate limiter in 1kpps
SWITCH/>qos storm broadcast enable 1k
QoS DSCP Remarking
Description:
Set or show the status of QoS DSCP Remarking.
Syntax:
QoS DSCP Remarking [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable QoS Remarking
disable : Disable QoS Remarking
Default Setting:
Disabled
Example:
Enable the status of QoS DSCP Remarking for port 1-4
SWITCH/>qos dscp remarking 1-4 enable
QoS DSCP Queue Mapping
Description:
Set or show the default port priority.
Syntax:
QoS DSCP Queue Mapping [] [] []
Parameters:
: Port list or 'all', default: All ports