Interlogix GE-DSSG-244-POE User Manual - Manual (Page 362)

User’s Manual of NS3601-24P/4S Series
360
LLDPMED Fast []
Parameters:
: The number of times the fast start LLDPDU are being sent during the activation of the fast start mechanism
defined by LLDP-MED (1-10).
LLDPMED Info
Description:
Show LLDP-MED neighbor device information.
Syntax:
LLDPMED Info []
Parameters:
: Port list or 'all', default: All ports
LLDPMED Debuge_med_transmit_var
Description:
Set or show if the current value of the global medTansmitEnable variable (Section Section 11.2.1, TIA 1057).
Syntax:
LLDPMED debug_med_transmit_var [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable - Set medTansmitEnable variable to true
disable : Disable - Set medTansmitEnable variable to false
(default: Show medTansmitEnable variable value)
Power over Ethernet Command
PoE Configuration
Description:
Show PoE configuration.
Syntax:
PoE Configuration
Parameters:
: Port list or 'all', default: All ports
Example:
Show PoE configuration.
SWITCH/>poe configuration
Port Mode Priority Max.Power[W] PowerAlloc[W]
---- ------- -------- --------------- -------------
1 Enabled High 15.4 15.4
2 Enabled High 15.4 15.4
3 Enabled High 15.4 15.4
4 Enabled High 15.4 15.4
5 Enabled High 15.4 15.4
6 Enabled High 15.4 15.4
7 Enabled High 15.4 15.4
8 Enabled High 15.4 15.4
9 Enabled High 15.4 15.4
10 Enabled High 15.4 15.4
11 Enabled High 15.4 15.4
12 Enabled High 15.4 15.4