Security network acl action, Security network acl policy, Security network acl rate – Interlogix GE-DSSG-244-POE User Manual User Manual
Page 324

User’s Manual of NS3601-24P/4S Series
322
Security Network ACL Action
Description:
Set or show the ACL port default action.
Syntax:
Security Network ACL Action [
Parameters:
: Port list or 'all', default: All ports
permit
: Permit forwarding (default)
deny
: Deny forwarding
: Rate limiter number (1-15) or 'disable'
: Port number for copy of frames or 'disable'
: System logging of frames: log|log_disable
: Shut down ingress port: shut|shut_disable
Default Setting:
300
Example:
Show ACL action in port 1
SWITCH/>security network acl action 1
Port Action Rate Limiter Port Copy Logging Shutdown Counter
---- ------ ------------ --------- -------- -------- -------
1 Permit Disabled Disabled Disabled Disabled 0
Security Network ACL Policy
Description:
Set or show the ACL port policy.
Syntax:
Security Network ACL Policy [
Parameters:
: Port list or 'all', default: All ports
: Policy number (1-8)
Default Setting:
1
Example:
Set ACL policy 2 for port 1
SWITCH/>security network acl policy 1 2
Security Network ACL Rate
Description:
Set or show the ACL rate limiter.
Syntax:
Security Network ACL Rate [
Parameters:
: Rate limiter list (1-15), default: All rate limiters
: Rate in pps (1, 2, 4, ..., 512, 1k, 2k, 4k, ..., 1024k)
Default Setting: