Interlogix GE-DSSG-244-POE User Manual - Manual (Page 250)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
248
• Power Allocation It limits the port PoE supply. Per port maximum value must be less than 15.4
watts
, and total ports values must be less than the Power Reservation value if
current PoE mode is 802.3af. Once power overload is detected, the port will
automatically shut down and keep on detection mode until PD’s power
consumption is lower than the power limit value
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
PoE Status
This page allows the user to inspect the total power consumption, total power reserved and current status for all PoE ports. The
screen is shown Figure 4-16-4.
Figure 4-16-4 PoE Status screenshot
The page includes the following fields:
Object Description
• Current Power
Consumption
Show the total watts usage of PoE Switch.
• Total Power Reserved Shows how much the total power be reserved for all PDs.
• PoE Temperature Unit 1 Display the current operating temperature of PoE chip unit 1.
The unit 1 is in charge of PoE Port-1~Port-12
• PoE Temperature Unit 2 Display the current operating temperature of PoE chip unit 2.
The unit 1 is in charge of PoE Port-13~Port-24