Gasboy CFN III Mgnr's Mnl V3.4 - Manual (Page 64)

Tank and Pump Commands
Page 48 MDE-4315 CFN Series CFN III Manager’s Manual for Windows NT · August 2004
.
The other method is to enter the amount of the price change as a quantity to be
added to or subtracted from the old price. This method can be used to raise or
lower either all price levels of one price code or all price codes by a specified
amount.
The form for the second command is LOAD PRICE code level change where:
• code is replaced by the price code(s) to be changed (either a number or * for
all price codes),
• level is replaced by the level(s) to be affected (either a number or * for all
levels),
• change is replaced by a + or - sign and the amount of the change in dollars
and cents.
This example raises all prices for all codes (indicated by the first asterisk after
LOAD PRICE) and all levels (the second asterisk) by five cents.
This next example subtracts two cents from all levels in price code 3.
Note: LOAD PRICE;I erases all price levels and price code prices for all
pumps that have been assigned price codes. This will disable all pumps.
You must re-enter new prices for all price codes and re-enable all pumps
with ENABLE PUMP after you use this command.
How to Delete a Price Code or Price Level
Use the command REMOVE PRICE or REM PR to delete one or more price
levels for a given price code.
P* LOAD PRICE;C
↵
Price code? 1
↵
Price level? 0 ↵
Price? 1.149
↵
Price level? 1 ↵
Price? 1.169
↵
Price level? 2 ↵
Price? 1.199
↵
Price level? ↵
Price code?
↵
P*
P* LOAD PRICE * * +.05 ↵
P*
All Codes All levels
P* LOAD PRICE 3 * -.02 ↵
Price level ? ↵
P*