Gasboy CFN III Mgnr's Mnl V3.4 - Manual (Page 248)

Diagnostic Commands System Status
Page 232 MDE-4315 CFN Series CFN III Manager’s Manual for Windows NT · August 2004
How To Examine Contents of Memory
The disk-based command DUMP displays the contents of various portions of
memory. You can use it to inspect transactions in progress (TIPs), tables by
name, or ranges of addresses in core.
DUMP TIP (DTIP) prints a human-readable status of transactions in progress.
DUMP can take several forms, as shown below:
• DTIP pumpnumber [P]
dumps the transaction in progress on the specified pump.
If the P option is given, it will display data for the previous transaction.
• DTIP NF consolenumber [P]
dumps the transaction in progress on the specified console.
If the P option is given, it will display data for the previous transaction.
• DUMP CORE [addressrange [page size]]
dumps the specified range of addresses from memory.
• DUMP tablename [major range [minor range]]
dumps, from the specified table, record numbers included in the major
range (or subrecords in the minor range).
Ranges of address may be specified using hexadecimal numbers separated by a
hyphen (-) character. Record number ranges are given in decimal numbers
separated by a hyphen.
4D FILE_BUF buffering for PC files (SC3)
4F PMP_DISPLAY pump tells reader to display
50 FREE_DISPLAY pump tells reader to abort
51 LOG_COMM log communications monitor text
52 GOT_ENTRY got non-PIN from PIN pad
53 DO_DPT_MESG reader process must call dpt_msg ( )
54 GO_FLEET put pump in fleet mode
55 LEAVE_FLEET take pump out of fleet mode
56 GET_VERSION request version information
57 ACK_MOP verify MOP at DPT/CRIND device
58 CODE_RECORD contains code file entry
59 WASH_BUF contains car wash message
5A TIP_BAG extra storage for a TIP
5B XFBROAD broadcast for a file transfer
5C DO_INVOICE request invoice buffer
5D INV_ERROR error occurred while printing invoice
5E SCRP_MESS site controller router protocol message
5F HOST_STORED we know the trans is stored on the host
60 ROUTCMD router command: (for multi-router)
61 ROUTFALLBACK router fallback function
Buffer Type Code Description