Gasboy CFN III Mgnr's Mnl V3.4 - Manual (Page 59)

MDE-4315 CFN Series CFN III Manager’s Manual for Windows NT · August 2004 Page 43
Tank and Pump Commands
6 – Tank and Pump Commands
Tank Commands
How to View Current Tank Inventory
To display the tank inventory for all tanks, use the command PRINT TANK or
P TA. The terminal will display the tank number (T#), total quantity (Totals),
and reorder level.
In addition, if a CFN-compatible Tank Monitor ® System (electronic tank gauge)
is installed on the tank and connected to the Site Controller, then the measured
tank quantities and tank ullage will be displayed. Ullage is the amount of
remaining space or unused capacity in the tank.
How to Add to and Subtract from Tank Inventory Counters
If a Tank Monitor System (TMS) is present, the site can be configured to
automatically add deliveries that are detected by the TMS to the inventory
totals. If your site has this capability, you will not need to add deliveries to
inventory manually and to do so will produce an error in the totals.
You might wish to make this adjustment if a physical measurement of the fuel
T# Tank number of tank.
Product Name of product stored in tank.
Total Inventory quantity in tank.
Reorder Reorder level at which a warning message will be logged.
Gauge Measured quantity in tank according to Tank Monitor System (TMS).
Diff Difference between inventory and measured quantities.
% Difference expressed as a percentage over or short.
Temp Measured temperature as reported by the TMS. Used by the TMS to
compute temperature-corrected gallons.
Ullage The amount of usable empty space remaining in the tank.
PRINT TANK (P TA)
P* PRINT TANK ↵
T# Product Total Reorder Gauge Diff % Temp Ullage
1 Regular 5000.000 5000.000 4995 5 0.1 65.2 5005
2 Unleaded 6240.000 5000.000 6240 0 0.0 65.2 3760
3 Diesel 19840.000 8000.000 19844 4 0.1 65.2 156
4 Premium 10000.000 5000.000 9999 1 0.1 65.2 1
P*