Gasboy CFN III Mgnr's Mnl V3.4 - Manual (Page 233)

MDE-4315 CFN Series CFN III Manager’s Manual for Windows NT · August 2004 Page 217
Configuration Command Summary
21 – Configuration Command Summary
Configuration commands affect operation of the system and should be used
only by trained personnel or with the advice of technical services.
The configuration commands are fully documented in MDE-4316 CFN III
Configuration Manual for Windows NT Version 3.4.
In the following summary forms of the configuration commands, square
brackets, [...], mean that the contents enclosed within the pair of brackets are
optional.
Disk-based Configuration Commands
Options for each command: [-P][-V] [filename]
-P for print current configuration
-V display in TTY form if port is configured as a CRT in the system
parameters, or vice versa
CONSOLE disk-based configuration program for a console
FUELPT disk-based configuration program for fuel point readers
GATE disk-based gate-reader configuration program.
PERM disk-based command to change permission levels of system
resident commands
PUMP disk-based configuration program for pumps
READER disk-based configuration program for island card reader
SYS_PAR disk-based configuration program for system parameters; main
configuration program for Site Controller
TABLE disk-based configuration program for data table sizes
TRFMT disk-based configuration program for local transaction format