Gasboy CFN III Mgnr's Mnl V3.4 - Manual (Page 18)

Introduction
Page 2 MDE-4315 CFN Series CFN III Manager’s Manual for Windows NT · August 2004
to do this for you. The CFN3 command window automatically opens. Press the
return key if your signon prompt does not display immediately.
Quitting Your CFN3 Application
The preferred way to quit the CFN3 application is to press the ALT key and
while continuing to press the ALT key, press the X key. This will terminate your
site operations. Should you forget this, this method is mentioned when you log
on at the top of the screen as illustrated in
Figure 1-1 .
Minimizing the Command Window
The site controller runs with either the command window open or minimized.
Minimizing the CFN3 command window collapses the window on your desktop
into the taskbar at the bottom of the screen, running it in the background. To
place the window in the background, click the small box in the upper right
corner of the command window that has an underline. Notice the box with the
“X”. Clicking once on the X will quit the application and terminate site
operations; this is not the recommended way of quitting the site operations. You
need to log on again by double clicking on the CFN3 icon. Remember that the
CFN3 command window must remain either open or minimized to
communicate with the SC III. If your window is not open, or has been
“minimized”, click once, using the left mouse button, on the CFN3 box in the
taskbar to open the window onto the desktop.
Should you accidently quit the CFN3 program by clicking in the “X” in the
upper right corner, double click on the CFN3 icon using the left mouse button
and log in again.
Levels of Operation
The SC III has 2 user levels of operation: Gasboy, which is the daily CFN3
operation (and Integral Profit Point if you have it) and Administrator which
allows you to add software updates, create/delete users, add passwords, change
your PC settings, etc. You can run your site from the Administrator level but it is
not recommended.