Gasboy CFN III Mgnr's Mnl V3.4 - Manual (Page 282)

Appendix D: Status and Error Messages
Page D-4 MDE-4315 CFN Series CFN III Manager’s Manual for Windows NT · August 2004
Card Reader Terminal #X Disabled
The indicated island card reader has been disabled by the command DISABLE
READER.
No action is required. Use the command ENABLE READER to return the card
reader to operation when appropriate.
Card Reader Terminal #X Paper Low
The indicated island card reader receipt printer is low on paper.
Replace paper in the receipt printer.
Card Reader Terminal #X Out of Paper
The indicated island card reader receipt printer is out of paper.
Replace paper in the receipt printer.
Card Reader Terminal #X Paper Refilled
Paper has been replaced in the indicated island card reader receipt printer.
No action is required.
Card Reader Terminal #X Printer Down
The indicated island card reader receipt printer is not functioning.
If you cannot find and correct the problem, call your service representative.
If the island card reader in question is not equipped with a receipt printer, then
ignore this message.
Card Reader Terminal #X Printer Jammed
The indicated island card reader receipt printer is not functioning.
If you cannot find and correct the problem, call your service representative.
Card Reader Terminal #X Printer Unjammed
The indicated island card reader receipt printer is now functioning.
Card Reader Terminal #X Printer Up
The indicated island card reader receipt printer is now functioning.