Gasboy CFN III Mgnr's Mnl V3.4 - Manual (Page 20)

Introduction
Page 4 MDE-4315 CFN Series CFN III Manager’s Manual for Windows NT · August 2004
Administrator Level
Administrator is where users are added or deleted, your hardware settings
changed, passwords changed, etc. You can also add software updates. The
Administrator requires a separate login, has a different password, and has
additional features/options. There are more icons displayed on the desktop.
The RUN command, used to install software from the Start button, is only
available from the Administrator level. This command is an NT operating
system command and is separate from the CFN3 RUN command.
Logging onto NT as Administrator
When the computer boots the default login is Gasboy. To make any changes to
your CFN3 setup you must log in as Administrator. To log in as Administrator:
1 Select Start->Shutdown.
2 Select Close All Programs by clicking once in the radio button.
3 Click Yes and hold down the Shift key until the login window appears.
4 Enter Administrator with your password (the default password is blank).
5 The desktop will appear similar to the Gasboy illustration. There are more icons
on the desktop and if you press the Start button in the taskbar, more options are
available to add software updates, etc.
6 When you have finished making your additions or changes, relogin as Gasboy
by selecting Start->Shutdown.
Miscellaneous NT Information
If you do not like the arrangement of the icons on the desktop, you can change
the arrangement by clicking once with the right mouse button anywhere on the
open desktop. Select an option from the list that appears.
To refresh your desktop, press F5. If using the Profit Point keyboard, F5 is All
Stop.