Gasboy CFN III Mgnr's Mnl V3.4 - Manual (Page 176)

CFN3 File System Directory Commands
Page 160 MDE-4315 CFN Series CFN III Manager’s Manual for Windows NT · August 2004
How to Create Directories
Use the command MKDIR or MK to create a new directory on the RAM drive. You must
specify the name of the directory on the command line. If you do not specify the name, you
will not be prompted for it. The directory will be created as a subdirectory of the current
directory, so first make sure the current directory is indeed where you want to add the new
directory.
How to Change to a Different Directory
Use the command CHDIR or CHD to change the current directory. You must specify the name
of the directory you want to change to on the command line. CHDIR .. changes directory to the
parent of the current directory. CHDIR / changes directory to the root directory.
How to Change to a Different Disk Drive from a Remote Site
To change to a different drive, you must exit the SC3 prompt. You do not change drives as you
do in DOS. Your prompt will always remain P*. This command is meant for remote access use
only.
While using the PC, make changes to different directories on other drives using a PC
command window (DOS) not the SCIII command window.
How to Print the Current Directory Name
Use the disk-based command WHERE to print the name of the current directory.
MKDIR (MK)
P* MKDIR MY_CMDS ↵
P*
CHDIR (CHD)
P* CHDIR MY_CMDS
↵
P*
P* sys
↵
[C:\SC3] ↵
[C:\SC3]exit
P*
WHERE
P* WHERE
↵
Current directory - R:
P* CHDIR BIN
↵
P* WHERE
↵
Current directory = R:BIN/
P*