Key option, Communicating with the site controller, Restrictions using the cfn with key option system – Gasboy CFN III Mgnr's Mnl V3.4 User Manual
Page 128
Proprietary Cards
Attendant Cards
Page 112
MDE-4315 CFN Series CFN III Manager’s Manual for Windows NT · August 2004
1
Select option 4. Configure Attendant reports. The following screen displays.
2
Change option 7. Use clerk number as attendant number to Y.
3
Change options 8 - 10 to desired tenders.
Note: For attendant cash sales, use tender 005. This should be the last tender specified.
Key Option
The Key Option allows the operator to use smart keys at an Islander II site.
Note: The Key Option may not be compatible with 1000 Fleetkey/TopKAT and the Fleet Key
Manager Plus will not be compatible with the CFN Key Option system. Please refer to
“Restrictions Using the CFN with Key Option System” on page 112.
Communicating with the Site Controller
The Site Controller must be configured to work the Key Option just as other proprietary cards.
See the chapter Key Option in the Site Controller II Configuration Manual for specific
information.
To communicate with the Site Controller, the Key is converted into a club card format before
the data is sent. The Key Option reads the following keys:
• Single Key
• Employee Key (dual)
• Vehicle Key (dual)
• Supervisor Key (supervisor option only)
• Delivery Key (fuel drop option only
• Dipstick key (dipstick option only)
• Code Key
Restrictions Using the CFN with Key Option System
1
You cannot use a 1000 FleetKey key that uses PINs in a CFN system and vice-versa. On a
1000 FleetKey system, the PIN number is encrypted. On a CFN Key Option the PIN number is
decrypted.
2
In a CFN with Key Option system, if you use a code key, the odometer is not stored on the key
(see
for more information).
********** Standard Reporting Package Parameters **********
1. Copies to print to log printer: 0
2. Copies to print to receipt printer: 1
3. Audit Copies to print to log printer: 0
4. Audit Copies to print to receipt printer: 0
5. Number of digits in attendant number: 2
6. Offset of attendant number in card data: 0
7. Use clerk number as attendant number: Y
8. Tender attendant is responsible for: 0
9. Optional second attendant Tender: 3
10.Optional third attendant Tender: 005
11.Display taxes separate in attendant report: N
----------------------------------------
Enter parameter #, or Q to quit: