Gasboy CFN III Mgnr's Mnl V3.4 - Manual (Page 60)

Tank and Pump Commands
Page 44 MDE-4315 CFN Series CFN III Manager’s Manual for Windows NT · August 2004
gives a result more or less than the amount indicated by the counter, in order to
bring the perpetual inventory amount back into line with the physical inventory
amount.
If product inventory is enabled (see set tank inventory counter), ADD or
SUBTRACT TANK will adjust the inventory for the corresponding product.
The C option is available for both commands.
Add Tank
1 Type: ADD TANK.
2 Enter Tank Number.
3 Enter Quantity.
The amount added is logged.
Subtract Tank
1 Type: SUBTRACT TANK
2 Enter Tank Number.
3 Enter Quantity.
The amount subtracted is logged.
How to Set Tank Inventory Counters
Use the command LOAD TANK or LO TA to set the Site Controller tank
inventory counters equal to the amount of fuel in the tanks. The quantity should
be in the same units (gallons or litres) that the pumps use. The Site Controller
tank inventory counters decrement each time fuel is pumped.
The product code entered with the LOAD TANK command associates the tank
with a product so inventory updates for that product can be done when the
commands ADD TANK and SUBTRACT TANK are used. Inventory updates
ADD TANK (AD TA)
P* ADD TANK ↵
Tank number? 14
↵
Quantity? 5000 ↵
P*
SUBTRACT TANK (SUB TA)
P* SUBTRACT TANK
↵
Tank number? 2 ↵
Quantity? 100
↵
P*