INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 87)

2 - 49
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
2.12.2.1 Battery Charger Components
The Battery Charger is shipped with a power cord and spare fuses.
2.12.2.2 Battery Charger Connections and Startup
Plug the power cord into the connector at the right rear of the Battery Charger. Then
plug into a grounded outlet. The ON light will illuminate. (The Battery Charger does
not have a power switch.)
As the Battery Charger performs a self-test, all the indicators will first turn amber.
Secondly, all receptacles that do not contain batteries will turn green. If a receptacle
contains a battery, it will turn red. Finally, all lights except for the ON indicator will
extinguish. No further warm-up is required; it is ready to charge batteries.
2.12.2.3 Loading the Battery Charger
The Battery Charger receptacles are identical and batteries in any state of charge
can be connected. Place Battery to be charged in one of the charging receptacles.
The respective indicator will illuminate green and charging will commence
immediately.
CAUTION
Do not use excessive force when placing the battery in
the battery charger.
CAUTION
Do not charge batteries in a moving vehicle.