INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 412)

11 - 52
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
5 To save a newly created method from the Method Editor, press the Save button
at the bottom right of the Method Editor Summary Page (see
Figure 11-45 ). The
dialog window shown in Figure 11-49 is displayed. Notice that the default
location to save a method file is to the HAPSITE.
NOTE: Method files can be saved to the HAPSITE only if the HAPSITE is
attached to the Laptop. Refer to section 2.4.6, Connect Laptop (if
desired), on page 2-10 for additional information on how to connect the
Laptop and HAPSITE.
Figure 11-49 Save Method File Dialog Window - HAPSITE Option Selected
6 On the File Name line, type a NEW file name. Refer to Figure 11-50 .
Figure 11-50 Entering a New Method File Name
7 The file location may be changed to save in the GCMS (Analyze) or Survey
directory, or a new one may be created using the Create Folder button, as
shown in
Figure 11-51 .