beautypg.com

INFICON HAPSITE Smart Plus Chemical Identification System User Manual

Page 295

background image

8 - 19

IP

N 07

4-

47

2-

P1

C

HAPSITE Smart Plus Operating Manual

7

Select Use the following IP address and enter the IP address of the
HAPSITE, (refer to

Step 3

on page 8-22), with the number 128 added to the

third number of the first line of the IP address. This is necessary in order for the
system to configure communications properly. Example: 10.210.4.62 becomes
10.210.132.62. Press OK.

NOTE: If configuring the HAPSITE for a wireless configuration, change the second

number, 210, to 209.

Figure 8-27 Entering IP Address

8

Press OK in the Internet Protocol Window to close the window.

9

Communication between the HAPSITE and the Laptop is now established as
indicated by the HAPSITE Sensor in the Plus IQ System Setup Window.

Figure 8-28 Active HAPSITE Sensor Icon