INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 191)

4 - 19
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
5 Instructions on screen calibration will appear. Touch OK or highlight OK and
push OK SEL. See
Figure 4-20 .
Figure 4-20 Calibration Instructions
CAUTION
Ignore the cursor when calibrating. Touching the cursor
during calibration may improperly calibrate the
touchscreen.
6 Touch precisely in the center of each of the four circles when prompted Touch
the targets to Calibrate. See
Figure 4-21 .
Figure 4-21 Calibration In Progress
NOTE: The circles will appear on the screen one at a time. After touching the
center, the next circle will appear.