INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 274)

7 - 32
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
3 After making Ion Energy adjustments:
3a If the red boxes no longer appear, indicating the Actual Resolution is within
range, proceed to
Step 4 . See Figure 7-36 .
3b If the HAPSITE is failing to Tune, then repeat the Manual Tune procedure.
Proceed to
section 7.6.1, Adjusting Base Peak Gain, on page 7-26 . If this
procedure is repeated more than 2 times, contact INFICON.
Figure 7-36 Good Manual Tune
4 Save the Tune file. Click Save Tune button on the upper Toolbar. See Figure
7-37 and Figure 7-38 .
93 90 170
117 140 170
167 140 220
213 175 230
246 180 230
263 185 250
282 190 255
Table 7-1 Manual Adjustments Guidelines (continued)
MASS IE low IE high