INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 370)

11 - 10
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Figure 11-8 Method Editor Startup Page for Survey Methods
The parameters on the Startup page are:
Use Internal Standard . . . . . . . . . . This option is shown on the Startup Page for
Survey methods. Refer to Figure 11-8 .
HAPSITE Temperatures (C)
Column . . . . . . . . . . . . . . . . . . . . . . The target temperature the Column must
achieve before starting data acquisition. (Not
used for Survey methods.)
Membrane . . . . . . . . . . . . . . . . . . . . The target temperature the Membrane must
achieve before setting before starting data
acquisition.
Valve Oven . . . . . . . . . . . . . . . . . . . The target temperature the Valve Oven must
achieve before starting data acquisition.