INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 300)

8 - 24
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
8.9.1 Changing Access Levels
NOTE: When Normal access level is selected, a message will appear stating that
some areas of Plus IQ will be restricted from access.
1 To change the access level, click on Tools on the System Startup Page.
1a Select Set Access Level.... See Figure 8-36 .
Figure 8-36 Choose Set Access Level.... from Tools Menu
2 To select advanced access, click on the Requested Access Level pull-down
menu and select Advanced. If a password has been entered, the current
password will need to be entered in the password box before pressing OK.
See
Figure 8-37 .
Figure 8-37 Change Access Level Window
3 The current access level of the system is shown at the bottom right corner of
the Plus IQ program, in the Status Bar, as shown in
Figure 8-38 .
Figure 8-38 Current Access level, shown in Status Ba r