INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 49)

2 - 11
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
2.4.6.1 Connect Laptop with Yellow Crossover Cable
Unscrew the cap on the port next to the probe connection. Plug in the yellow
crossover cable into this port. The opposite end plugs into the COM1 port on the
Laptop computer. Once connected, the crossover cable provides the
communication connection between the HAPSITE and Laptop computer. See
Figure 2-19 and Figure 2-20 .
Figure 2-19 Crossover Connection to HAPSITE
Figure 2-20 Crossover Connection to Laptop
2.4.6.2 Connect Laptop with Wireless Connection
See Chapter 4, Wireless and Touch Screen Options for information on enabling the
wireless connection.