beautypg.com

2 configuring the hapsite for communications – INFICON HAPSITE Smart Plus Chemical Identification System User Manual

Page 291

background image

8 - 15

IP

N 07

4-

47

2-

P1

C

HAPSITE Smart Plus Operating Manual

8.6.2 Configuring the HAPSITE for Communications

1

If communication between the HAPSITE and the Laptop could not be
established using

Section 8.6.1, Setting Up Communications, on page 8-13

continue with

Step 2

.

2

Press the STAT key on the front panel of the HAPSITE until the System
Parameters page is displayed.

3

Use the arrow keys to highlight NET, push OK SEL. Alternately, touch NET.
The IP address of the HAPSITE will be displayed. Example: 10.210.4.62 /
255.254.0.0. Each HAPSITE will have a unique IP address.

4

On the Laptop, press Start. Depending on the Laptop’s setup follow either

Step

4a

or

Step 4b

.

4a

Click on Settings, drag the cursor over Network Connections, drag the cursor
over Local Area Connection and click the Left Mouse Button. See

Figure

8-23

.

NOTE: For wireless connections, select Wireless Network Connection.

Figure 8-23 Network Connections Classic View