INFICON HAPSITE Smart Plus Chemical Identification System - Manual (Page 120)

3 - 26
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
4 Using the touch screen, touch RUN ANALYZE. See Figure 3-43 .
Figure 3-43 Analyze Button
5 Alternately, if using the push buttons, push ANALYZE RUN. See Figure 3-44 .
Figure 3-44 Analyze Run
6 When the screen prompts, Collect Sample Now hold the probe over the
sample. Continue to collect sample during both the Line Purge and ConcFill
screens. See
Figure 3-45 .
NOTE: The Line Purge is based on time while the ConcFill is based on volume.
During the Line Purge event, the sample is flowing through the system
and out through the exhaust to improve sampling accuracy. During the
ConcFill, the sample is being collected by the system for analysis.